Room Heater Cost Picker
Cheapest way to heat one room — or just yourself. Honest physics.
Damp, Condensation & Dehumidifier Planner (Ireland)
A dehumidifier is useful for airborne moisture and drying, but it cannot repair a leaking pipe, rain entry or a wet wall. This enhanced planner starts with the location and timing of the damp, routes obvious red flags towards the right investigation, calculates room-air dew point when you have readings, and only then sizes a machine for the cases that fit condensation.
Reviewed 23 jul 2026
The tool
Open the tool full-screen ↗Use it right here — nothing is saved, and there’s no sign-up.
This tool may link to relevant products and services to keep it free. Affiliate links are marked and are placeholders during this early phase — see our affiliate disclosure
What to know
Condensation tends to appear on windows, cold external corners and poorly aired surfaces, then worsen in winter or after showers, cooking and indoor laundry. A patch that follows rain, a local wet spot beside plumbing, or a persistent low-wall tide mark points away from a simple whole-room humidity problem. The tool treats these as patterns rather than a remote diagnosis and explains what to check first.
When condensation is the likely route, size and temperature still matter. Compressor machines are usually more efficient in heated rooms, while desiccant models retain performance in cold spaces. The optional dew-point calculation shows the surface temperature at which the measured room air can condense, and the cost model makes the energy trade-off visible before you buy.
How this tool works
No sign-up, nothing saved — here is what it does with your answers.
- Enter the size, damp severity, temperature and indoor-laundry load for the affected space.
- Choose where the moisture appears and when it is worst, adding temperature and humidity readings if you have them.
- Get a cautious action route, optional dew point, and a dehumidifier size, type and running cost where a machine is appropriate.
Frequently asked questions
How can I tell condensation from penetrating damp?
Condensation favours cold surfaces and follows cold weather or moisture-producing activity. A patch that tracks rain, plumbing use or a persistent low-wall band needs the source investigated. The pattern checker explains the likely route but does not replace a survey.
What does a dew-point result mean?
It is the temperature at which the measured room air can form water on a surface. If the dew point is 11°C, a wall or window at 11°C or colder can condense. The calculation does not measure the actual surface temperature.
Will a dehumidifier fix rising damp, rain entry or a leak?
No. It can help dry materials after the source is repaired, or temporarily manage moisture while work is arranged, but it cannot correct a pipe, roof, gutter, drainage, ground-level or wall defect.
Related tools
Working through a project? These pair up.
Appliance Running Cost Calculator
What your immersion, dryer, shower and heaters really cost to run.
BER Estimator
What BER is my house — and which single upgrade moves it most?
These tools give honest indications using current published rates and guidance, not professional advice. Rules, prices and provider terms change — always confirm the current figures with the relevant official body, provider or qualified professional before you commit.